Landmark Homes (Edmonton) Inc

Builders
Edmonton AB T6E 5J4
Write a Review
Write a Review

HomeStars  >  Builders in Edmonton  >  Landmark Homes (Edmonton) Inc  >  Poor Craftsmanship and Worse Fit Out Products
Shane in Edmonton
Shane in Edmonton
3 reviews Edmonton, AB
3/10

Poor Craftsmanship and Worse Fit Out Products

I purchased my house in 2017 with Lanmark. I was originally happy with the purchase, but now after 5 years all the cheap materials and poor craftsmanship is catching up and I am already in need of major repairs.

All the doors leading to outside were hung so poorly they have not functioned properly since day one. I brought this up in my one-year warranty period and they did nothing to fix but put in a couple extra screws. My back door is rotting on the frame due to incorrect mounting, sealing and is causing molding in the flooring as well. A look at it, shows it was not even caulked properly, hung straight, or sealed properly. This is happening to all the houses that are the same on my block.

The flooring they chose is complete rubbish. They fixed it when I moved in by literally painting the chips with a marker. It is lifting everywhere and has chipped off many corners or is swelling all around the house. 5 years old and needing to be replaced is unacceptable. Everyone's front step has cracked off and sunken very far due to bad civil work. Carpeting is bumpy due to incorrect installtion and leaving it too loose. Also, how do you pull out a stacker washer dryer in a single closet onto carpeting? If you have a solution let me know as its back breaking, wrecks teh carpeting more, and its impossible to plug in the hoses and plugs unless you have a child that can squeeze in there before you push them back. Not a very smart build with no access.

The electrical is missing plugs in areas as per CEC and they tied all lights together to save money. The island lights were combined with all kitchen lights until I dug up in the ceiling and separated this as well as the stairs with the upstairs lights. Many electrical code infractions I have found, for example cutting the grounds off in the outlet boxes and leaving them straight under the screw. CEC states it must be wrapped around the bond screw and minimum 150mm to be left in the outlet box. Very poor electrical installation. Downstairs has next to no water pressure in basement level as well with a big crack in the floor near the sump hole.

Approximate cost of services:
$380,000.00
Was this review helpful?